/* Simple DirectMedia Layer Copyright (C) 1997-2026 Sam Lantinga This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. */ #include "SDL_internal.h" #ifdef SDL_VIDEO_DRIVER_KMSDRM /* Include this first, as some system headers may pull in EGL headers that * define EGL types as native types for other enabled platforms, which can * result in type-mismatch warnings when building with LTO. */ #include "../SDL_egl_c.h" // SDL internals #include "../../events/SDL_events_c.h" #include "../../events/SDL_keyboard_c.h" #include "../../events/SDL_mouse_c.h" #ifdef SDL_INPUT_LINUXEV #include "../../core/linux/SDL_evdev.h" #elif defined SDL_INPUT_WSCONS #include "../../core/openbsd/SDL_wscons.h" #endif // KMS/DRM declarations #include "SDL_kmsdrmdyn.h" #include "SDL_kmsdrmevents.h" #include "SDL_kmsdrmmouse.h" #include "SDL_kmsdrmvideo.h" #include "SDL_kmsdrmopengles.h" #include "SDL_kmsdrmvulkan.h" #include #include #include #include #include #include #ifdef SDL_PLATFORM_OPENBSD static bool moderndri = false; #else static bool moderndri = true; #endif static char kmsdrm_dri_path[16]; static int kmsdrm_dri_pathsize = 0; static char kmsdrm_dri_devname[8]; static int kmsdrm_dri_devnamesize = 0; static char kmsdrm_dri_cardpath[32]; /* for older KMSDRM headers... */ #ifndef DRM_FORMAT_MOD_VENDOR_NONE #define DRM_FORMAT_MOD_VENDOR_NONE 0 #endif #ifndef DRM_FORMAT_MOD_LINEAR #define DRM_FORMAT_MOD_LINEAR fourcc_mod_code(NONE, 0) #endif #ifndef EGL_PLATFORM_GBM_KHR #define EGL_PLATFORM_GBM_KHR 0x31D7 #endif static int get_driindex(void) { int available = -ENOENT; char device[sizeof(kmsdrm_dri_cardpath)]; int drm_fd; int i; int devindex = -1; DIR *folder; const char *hint; struct dirent *res; hint = SDL_GetHint(SDL_HINT_KMSDRM_DEVICE_INDEX); if (hint && *hint) { char *endptr = NULL; const int idx = (int)SDL_strtol(hint, &endptr, 10); if ((*endptr == '\0') && (idx >= 0)) { /* *endptr==0 means "whole string was a valid number" */ return idx; // we'll take the user's request here. } } SDL_strlcpy(device, kmsdrm_dri_path, sizeof(device)); folder = opendir(device); if (!folder) { SDL_SetError("Failed to open directory '%s'", device); return -ENOENT; } SDL_strlcpy(device + kmsdrm_dri_pathsize, kmsdrm_dri_devname, sizeof(device) - kmsdrm_dri_pathsize); while((res = readdir(folder)) != NULL && available < 0) { if (SDL_memcmp(res->d_name, kmsdrm_dri_devname, kmsdrm_dri_devnamesize) == 0) { SDL_strlcpy(device + kmsdrm_dri_pathsize + kmsdrm_dri_devnamesize, res->d_name + kmsdrm_dri_devnamesize, sizeof(device) - kmsdrm_dri_pathsize - kmsdrm_dri_devnamesize); drm_fd = open(device, O_RDWR | O_CLOEXEC); if (drm_fd >= 0) { devindex = SDL_atoi(device + kmsdrm_dri_pathsize + kmsdrm_dri_devnamesize); if (SDL_KMSDRM_LoadSymbols()) { drmModeRes *resources = KMSDRM_drmModeGetResources(drm_fd); if (resources) { SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "%s%d connector, encoder and CRTC counts are: %d %d %d", kmsdrm_dri_cardpath, devindex, resources->count_connectors, resources->count_encoders, resources->count_crtcs); if (resources->count_connectors > 0 && resources->count_encoders > 0 && resources->count_crtcs > 0) { available = -ENOENT; for (i = 0; i < resources->count_connectors && available < 0; i++) { drmModeConnector *conn = KMSDRM_drmModeGetConnector( drm_fd, resources->connectors[i]); if (!conn) { continue; } if (conn->connection == DRM_MODE_CONNECTED && conn->count_modes) { bool access_denied = false; if (SDL_GetHintBoolean( SDL_HINT_KMSDRM_REQUIRE_DRM_MASTER, true)) { /* Skip this device if we can't obtain * DRM master */ KMSDRM_drmSetMaster(drm_fd); if (KMSDRM_drmAuthMagic(drm_fd, 0) == -EACCES) { access_denied = true; } } if (!access_denied) { available = devindex; } } KMSDRM_drmModeFreeConnector(conn); } } KMSDRM_drmModeFreeResources(resources); } SDL_KMSDRM_UnloadSymbols(); } close(drm_fd); } else { SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Failed to open KMSDRM device %s, errno: %d", device, errno); } } } closedir(folder); return available; } static void CalculateRefreshRate(drmModeModeInfo *mode, int *numerator, int *denominator) { *numerator = mode->clock * 1000; *denominator = mode->htotal * mode->vtotal; if (mode->flags & DRM_MODE_FLAG_INTERLACE) { *numerator *= 2; } if (mode->flags & DRM_MODE_FLAG_DBLSCAN) { *denominator *= 2; } if (mode->vscan > 1) { *denominator *= mode->vscan; } } int add_connector_property(drmModeAtomicReq *req, KMSDRM_connector *conn, const char *name, uint64_t value) { unsigned int i; int prop_id = 0; for (i = 0 ; i < conn->props->count_props ; i++) { if (SDL_strcmp(conn->props_info[i]->name, name) == 0) { prop_id = conn->props_info[i]->prop_id; break; } } if (prop_id < 0) { SDL_SetError("no connector property: %s", name); return -EINVAL; } return KMSDRM_drmModeAtomicAddProperty(req, conn->connector->connector_id, prop_id, value); } int add_crtc_property(drmModeAtomicReq *req, KMSDRM_crtc *c, const char *name, uint64_t value) { unsigned int i; int prop_id = -1; for (i = 0 ; i < c->props->count_props ; i++) { if (SDL_strcmp(c->props_info[i]->name, name) == 0) { prop_id = c->props_info[i]->prop_id; break; } } if (prop_id < 0) { SDL_SetError("no crtc property: %s", name); return -EINVAL; } return KMSDRM_drmModeAtomicAddProperty(req, c->crtc->crtc_id, prop_id, value); } int add_plane_property(drmModeAtomicReq *req, KMSDRM_plane *p, const char *name, uint64_t value) { unsigned int i; int prop_id = -1; for (i = 0 ; i < p->props->count_props ; i++) { if (SDL_strcmp(p->props_info[i]->name, name) == 0) { prop_id = p->props_info[i]->prop_id; break; } } if (prop_id < 0) { SDL_SetError("no plane property: %s", name); return -EINVAL; } return KMSDRM_drmModeAtomicAddProperty(req, p->plane->plane_id, prop_id, value); } #ifdef DEBUG_KMSDRM static void print_plane_info(SDL_VideoDevice *_this, drmModePlanePtr plane) { SDL_VideoData *viddata = ((SDL_VideoData *)_this->internal); drmModeObjectPropertiesPtr props = KMSDRM_drmModeObjectGetProperties(viddata->drm_fd, plane->plane_id, DRM_MODE_OBJECT_PLANE); /* Search the plane props for the plane type. */ uint32_t type = 0; for (int i = 0; i < props->count_props; i++) { drmModePropertyPtr p = KMSDRM_drmModeGetProperty(viddata->drm_fd, props->props[i]); if ((SDL_strcmp(p->name, "type") == 0)) { type = props->prop_values[i]; } KMSDRM_drmModeFreeProperty(p); } char *plane_type = "unknown"; switch (type) { case DRM_PLANE_TYPE_OVERLAY: plane_type = "overlay"; break; case DRM_PLANE_TYPE_PRIMARY: plane_type = "primary"; break; case DRM_PLANE_TYPE_CURSOR: plane_type = "cursor"; break; } /* Remember that to present a plane on screen, it has to be connected to a CRTC so the CRTC scans it, scales it, etc... and presents it on screen. */ /* Now we look for the CRTCs supported by the plane. */ drmModeRes *resources = KMSDRM_drmModeGetResources(viddata->drm_fd); if (resources) { printf("--PLANE ID: %d\nPLANE TYPE: %s\nCRTC READING THIS PLANE: %d\nCRTCS SUPPORTED BY THIS PLANE: ", plane->plane_id, plane_type, plane->crtc_id); for (int i = 0; i < resources->count_crtcs; i++) { if (plane->possible_crtcs & (1 << i)) { uint32_t crtc_id = resources->crtcs[i]; printf ("%d", crtc_id); break; } } printf ("\n\n"); } } static void get_planes_info(SDL_VideoDevice *_this, SDL_DisplayData *dispdata) { SDL_VideoData *viddata = ((SDL_VideoData *)_this->internal); drmModePlaneResPtr plane_resources = KMSDRM_drmModeGetPlaneResources(viddata->drm_fd); if (!plane_resources) { printf("drmModeGetPlaneResources failed: %s\n", strerror(errno)); return; } printf("--Number of planes found: %d-- \n", plane_resources->count_planes); printf("--Usable CRTC that we have chosen: %d-- \n", dispdata->crtc.crtc->crtc_id); /* Iterate on all the available planes. */ for (uint32_t i = 0; (i < plane_resources->count_planes); i++) { const uint32_t plane_id = plane_resources->planes[i]; drmModePlanePtr plane = KMSDRM_drmModeGetPlane(viddata->drm_fd, plane_id); if (!plane) { printf("drmModeGetPlane(%u) failed: %s\n", plane_id, strerror(errno)); continue; } /* Print plane info. */ print_plane_info(_this, plane); KMSDRM_drmModeFreePlane(plane); } KMSDRM_drmModeFreePlaneResources(plane_resources); } #endif /* Get the plane_id of a plane that is of the specified plane type (primary, overlay, cursor...) and can use specified CRTC. */ static int get_plane_id(SDL_VideoDevice *_this, unsigned int crtc_id, uint32_t plane_type) { drmModeRes *resources = NULL; drmModePlaneResPtr plane_resources = NULL; uint32_t i, j; unsigned int crtc_index = 0; int ret = -EINVAL; int found = 0; SDL_VideoData *viddata = ((SDL_VideoData *)_this->internal); resources = KMSDRM_drmModeGetResources(viddata->drm_fd); /* Get the crtc_index for the current CRTC. It's needed to find out if a plane supports the CRTC. */ for (i = 0; i < resources->count_crtcs; i++) { if (resources->crtcs[i] == crtc_id) { crtc_index = i; break; } } plane_resources = KMSDRM_drmModeGetPlaneResources(viddata->drm_fd); if (!plane_resources) { return SDL_SetError("drmModeGetPlaneResources failed."); } /* Iterate on all the available planes. */ for (i = 0; (i < plane_resources->count_planes) && !found; i++) { uint32_t plane_id = plane_resources->planes[i]; drmModePlanePtr plane = KMSDRM_drmModeGetPlane(viddata->drm_fd, plane_id); if (!plane) { continue; } /* See if the current CRTC is available for this plane. */ if (plane->possible_crtcs & (1 << crtc_index)) { drmModeObjectPropertiesPtr props = KMSDRM_drmModeObjectGetProperties( viddata->drm_fd, plane_id, DRM_MODE_OBJECT_PLANE); ret = plane_id; /* Iterate on the plane props to find the type of the plane, to see if it's of the type we want. */ for (j = 0; j < props->count_props; j++) { drmModePropertyPtr p = KMSDRM_drmModeGetProperty(viddata->drm_fd, props->props[j]); if ((SDL_strcmp(p->name, "type") == 0) && (props->prop_values[j] == plane_type)) { /* found our plane, use that: */ found = 1; } KMSDRM_drmModeFreeProperty(p); } KMSDRM_drmModeFreeObjectProperties(props); } KMSDRM_drmModeFreePlane(plane); } KMSDRM_drmModeFreePlaneResources(plane_resources); KMSDRM_drmModeFreeResources(resources); return ret; } /* Setup a plane and it's props. */ bool setup_plane(SDL_VideoDevice *_this, SDL_DisplayData *dispdata, KMSDRM_plane **_plane, uint32_t plane_type) { uint32_t plane_id; SDL_VideoData *viddata = ((SDL_VideoData *)_this->internal); bool ret = true; *_plane = SDL_calloc(1, sizeof(**_plane)); if (!(*_plane)) { ret = false; goto cleanup; } /* Get plane ID for a given CRTC and plane type. */ plane_id = get_plane_id(_this, dispdata->crtc.crtc->crtc_id, plane_type); if (!plane_id) { ret = SDL_SetError("Invalid Plane ID"); goto cleanup; } /* Get the DRM plane itself. */ (*_plane)->plane = KMSDRM_drmModeGetPlane(viddata->drm_fd, plane_id); /* Get the DRM plane properties. */ if ((*_plane)->plane) { unsigned int i; (*_plane)->props = KMSDRM_drmModeObjectGetProperties(viddata->drm_fd, (*_plane)->plane->plane_id, DRM_MODE_OBJECT_PLANE); (*_plane)->props_info = SDL_calloc((*_plane)->props->count_props, sizeof(*(*_plane)->props_info)); if ( !((*_plane)->props_info) ) { ret = false; goto cleanup; } for (i = 0; i < (*_plane)->props->count_props; i++) { (*_plane)->props_info[i] = KMSDRM_drmModeGetProperty(viddata->drm_fd, (*_plane)->props->props[i]); } } cleanup: if (!ret) { if (*_plane) { SDL_free(*_plane); *_plane = NULL; } } return ret; } /* Free a plane and it's props. */ void free_plane(KMSDRM_plane **_plane) { if (*_plane) { if ((*_plane)->plane) { KMSDRM_drmModeFreePlane((*_plane)->plane); (*_plane)->plane = NULL; } if ((*_plane)->props_info) { SDL_free((*_plane)->props_info); (*_plane)->props_info = NULL; } SDL_free(*_plane); *_plane = NULL; } } /**********************************************************************************/ /* The most important ATOMIC fn of the backend. */ /* A PLANE reads a BUFFER, and a CRTC reads a PLANE and sends it's contents */ /* over to a CONNECTOR->ENCODER system (several CONNECTORS can be connected */ /* to the same PLANE). */ /* Think of a plane as a "frame" surrounding a picture, where the "picture" */ /* is the buffer, and we move the "frame" from a picture to another, */ /* and the one that has the "frame" is the one sent over to the screen */ /* via the CONNECTOR->ENCODER system. */ /* Think of a PLANE as being "in the middle", it's the CENTRAL part */ /* between the CRTC and the BUFFER that is shown on screen. */ /* What we do here is connect a PLANE to a CRTC and a BUFFER. */ /* -ALWAYS set the CRTC_ID and FB_ID attribs of a plane at the same time, */ /* meaning IN THE SAME atomic request. */ /* -And NEVER destroy a GBM surface whose buffers are being read by a plane: */ /* first, move the plane away from those buffers and ONLY THEN destroy the */ /* buffers and/or the GBM surface containing them. */ /**********************************************************************************/ void drm_atomic_set_plane_props(SDL_DisplayData *dispdata, struct KMSDRM_PlaneInfo *info) { /* Do we have a set of changes already in the making? If not, allocate a new one. */ if (!dispdata->atomic_req) { dispdata->atomic_req = KMSDRM_drmModeAtomicAlloc(); } add_plane_property(dispdata->atomic_req, info->plane, "FB_ID", info->fb_id); add_plane_property(dispdata->atomic_req, info->plane, "CRTC_ID", info->crtc_id); add_plane_property(dispdata->atomic_req, info->plane, "SRC_W", info->src_w << 16); add_plane_property(dispdata->atomic_req, info->plane, "SRC_H", info->src_h << 16); add_plane_property(dispdata->atomic_req, info->plane, "SRC_X", info->src_x); add_plane_property(dispdata->atomic_req, info->plane, "SRC_Y", info->src_y); add_plane_property(dispdata->atomic_req, info->plane, "CRTC_W", info->crtc_w); add_plane_property(dispdata->atomic_req, info->plane, "CRTC_H", info->crtc_h); add_plane_property(dispdata->atomic_req, info->plane, "CRTC_X", info->crtc_x); add_plane_property(dispdata->atomic_req, info->plane, "CRTC_Y", info->crtc_y); } int drm_atomic_commit(SDL_VideoDevice *_this, SDL_DisplayData *dispdata, bool blocking, bool allow_modeset) { SDL_VideoData *viddata = ((SDL_VideoData *)_this->internal); uint32_t atomic_flags = 0; int ret; if (!blocking) { atomic_flags |= DRM_MODE_ATOMIC_NONBLOCK; } if (allow_modeset) { atomic_flags |= DRM_MODE_ATOMIC_ALLOW_MODESET; } /* Never issue a new atomic commit if previous has not yet completed, or it will error. */ drm_atomic_waitpending(_this, dispdata); ret = KMSDRM_drmModeAtomicCommit(viddata->drm_fd, dispdata->atomic_req, atomic_flags, NULL); if (ret) { SDL_SetError("Atomic commit failed, returned %d.", ret); /* Uncomment this for fast-debugging */ #if 0 printf("ATOMIC COMMIT FAILED: %s.\n", strerror(errno)); #endif goto out; } if (dispdata->kms_in_fence_fd != -1) { close(dispdata->kms_in_fence_fd); dispdata->kms_in_fence_fd = -1; } out: KMSDRM_drmModeAtomicFree(dispdata->atomic_req); dispdata->atomic_req = NULL; return ret; } void drm_atomic_waitpending(SDL_VideoDevice *_this, SDL_DisplayData *dispdata) { /* Will return immediately if we have already destroyed the fence, because we NULL-ify it just after. Also, will return immediately in double-buffer mode, because kms_fence will alsawys be NULL. */ if (dispdata->kms_fence) { EGLint status; do { status = _this->egl_data->eglClientWaitSyncKHR(_this->egl_data->egl_display, dispdata->kms_fence, 0, EGL_FOREVER_KHR); } while (status != EGL_CONDITION_SATISFIED_KHR); _this->egl_data->eglDestroySyncKHR(_this->egl_data->egl_display, dispdata->kms_fence); dispdata->kms_fence = NULL; } } static bool KMSDRM_Available(void) { #ifdef SDL_PLATFORM_OPENBSD struct utsname nameofsystem; double releaseversion; #endif int ret = -ENOENT; #ifdef SDL_PLATFORM_OPENBSD if (!(uname(&nameofsystem) < 0)) { releaseversion = SDL_atof(nameofsystem.release); if (releaseversion >= 6.9) { moderndri = true; } } #endif if (moderndri) { SDL_strlcpy(kmsdrm_dri_path, "/dev/dri/", sizeof(kmsdrm_dri_path)); SDL_strlcpy(kmsdrm_dri_devname, "card", sizeof(kmsdrm_dri_devname)); } else { SDL_strlcpy(kmsdrm_dri_path, "/dev/", sizeof(kmsdrm_dri_path)); SDL_strlcpy(kmsdrm_dri_devname, "drm", sizeof(kmsdrm_dri_devname)); } kmsdrm_dri_pathsize = SDL_strlen(kmsdrm_dri_path); kmsdrm_dri_devnamesize = SDL_strlen(kmsdrm_dri_devname); (void)SDL_snprintf(kmsdrm_dri_cardpath, sizeof(kmsdrm_dri_cardpath), "%s%s", kmsdrm_dri_path, kmsdrm_dri_devname); ret = get_driindex(); if (ret >= 0) { return true; } return false; } static void KMSDRM_DeleteDevice(SDL_VideoDevice *device) { if (device->internal) { SDL_free(device->internal); device->internal = NULL; } SDL_free(device); SDL_KMSDRM_UnloadSymbols(); } static SDL_VideoDevice *KMSDRM_CreateDevice(void) { SDL_VideoDevice *device; SDL_VideoData *viddata; int devindex; if (!KMSDRM_Available()) { return NULL; } devindex = get_driindex(); if (devindex < 0) { SDL_SetError("devindex (%d) must not be negative.", devindex); return NULL; } if (!SDL_KMSDRM_LoadSymbols()) { return NULL; } device = (SDL_VideoDevice *)SDL_calloc(1, sizeof(SDL_VideoDevice)); if (!device) { return NULL; } viddata = (SDL_VideoData *)SDL_calloc(1, sizeof(SDL_VideoData)); if (!viddata) { goto cleanup; } viddata->devindex = devindex; viddata->drm_fd = -1; device->internal = viddata; // Setup all functions which we can handle device->VideoInit = KMSDRM_VideoInit; device->VideoQuit = KMSDRM_VideoQuit; device->GetDisplayModes = KMSDRM_GetDisplayModes; device->SetDisplayMode = KMSDRM_SetDisplayMode; device->CreateSDLWindow = KMSDRM_CreateWindow; device->SetWindowTitle = KMSDRM_SetWindowTitle; device->SetWindowPosition = KMSDRM_SetWindowPosition; device->SetWindowSize = KMSDRM_SetWindowSize; device->SetWindowFullscreen = KMSDRM_SetWindowFullscreen; device->ShowWindow = KMSDRM_ShowWindow; device->HideWindow = KMSDRM_HideWindow; device->RaiseWindow = KMSDRM_RaiseWindow; device->MaximizeWindow = KMSDRM_MaximizeWindow; device->MinimizeWindow = KMSDRM_MinimizeWindow; device->RestoreWindow = KMSDRM_RestoreWindow; device->DestroyWindow = KMSDRM_DestroyWindow; device->SetWindowFocusable = KMSDRM_SetWindowFocusable; device->GL_LoadLibrary = KMSDRM_GLES_LoadLibrary; device->GL_GetProcAddress = KMSDRM_GLES_GetProcAddress; device->GL_UnloadLibrary = KMSDRM_GLES_UnloadLibrary; device->GL_CreateContext = KMSDRM_GLES_CreateContext; device->GL_MakeCurrent = KMSDRM_GLES_MakeCurrent; device->GL_SetSwapInterval = KMSDRM_GLES_SetSwapInterval; device->GL_GetSwapInterval = KMSDRM_GLES_GetSwapInterval; device->GL_SwapWindow = KMSDRM_GLES_SwapWindow; device->GL_DestroyContext = KMSDRM_GLES_DestroyContext; device->GL_DefaultProfileConfig = KMSDRM_GLES_DefaultProfileConfig; #ifdef SDL_VIDEO_VULKAN device->Vulkan_LoadLibrary = KMSDRM_Vulkan_LoadLibrary; device->Vulkan_UnloadLibrary = KMSDRM_Vulkan_UnloadLibrary; device->Vulkan_GetInstanceExtensions = KMSDRM_Vulkan_GetInstanceExtensions; device->Vulkan_CreateSurface = KMSDRM_Vulkan_CreateSurface; device->Vulkan_DestroySurface = KMSDRM_Vulkan_DestroySurface; #endif device->PumpEvents = KMSDRM_PumpEvents; device->free = KMSDRM_DeleteDevice; return device; cleanup: SDL_free(device); SDL_free(viddata); return NULL; } VideoBootStrap KMSDRM_bootstrap = { "kmsdrm", "KMS/DRM Video Driver", KMSDRM_CreateDevice, NULL, // no ShowMessageBox implementation false }; static void KMSDRM_FBDestroyCallback(struct gbm_bo *bo, void *data) { KMSDRM_FBInfo *fb_info = (KMSDRM_FBInfo *)data; if (fb_info && fb_info->drm_fd >= 0 && fb_info->fb_id != 0) { KMSDRM_drmModeRmFB(fb_info->drm_fd, fb_info->fb_id); SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Delete DRM FB %u", fb_info->fb_id); } SDL_free(fb_info); } KMSDRM_FBInfo *KMSDRM_FBFromBO(SDL_VideoDevice *_this, struct gbm_bo *bo) { SDL_VideoData *viddata = _this->internal; unsigned w, h; int rc = -1; int num_planes = 0; uint32_t format, strides[4] = { 0 }, handles[4] = { 0 }, offsets[4] = { 0 }, flags = 0; uint64_t modifiers[4] = { 0 }; // Check for an existing framebuffer KMSDRM_FBInfo *fb_info = (KMSDRM_FBInfo *)KMSDRM_gbm_bo_get_user_data(bo); if (fb_info) { return fb_info; } /* Create a structure that contains enough info to remove the framebuffer when the backing buffer is destroyed */ fb_info = (KMSDRM_FBInfo *)SDL_calloc(1, sizeof(KMSDRM_FBInfo)); if (!fb_info) { return NULL; } fb_info->drm_fd = viddata->drm_fd; /* Create framebuffer object for the buffer using the modifiers requested by GBM. Use of the modifiers is necessary on some platforms. */ w = KMSDRM_gbm_bo_get_width(bo); h = KMSDRM_gbm_bo_get_height(bo); format = KMSDRM_gbm_bo_get_format(bo); if (KMSDRM_drmModeAddFB2WithModifiers && KMSDRM_gbm_bo_get_modifier && KMSDRM_gbm_bo_get_plane_count && KMSDRM_gbm_bo_get_offset && KMSDRM_gbm_bo_get_stride_for_plane && KMSDRM_gbm_bo_get_handle_for_plane) { modifiers[0] = KMSDRM_gbm_bo_get_modifier(bo); num_planes = KMSDRM_gbm_bo_get_plane_count(bo); for (int i = 0; i < num_planes; i++) { strides[i] = KMSDRM_gbm_bo_get_stride_for_plane(bo, i); handles[i] = KMSDRM_gbm_bo_get_handle_for_plane(bo, i).u32; offsets[i] = KMSDRM_gbm_bo_get_offset(bo, i); modifiers[i] = modifiers[0]; } if (modifiers[0] && modifiers[0] != DRM_FORMAT_MOD_INVALID) { flags = DRM_MODE_FB_MODIFIERS; } rc = KMSDRM_drmModeAddFB2WithModifiers(viddata->drm_fd, w, h, format, handles, strides, offsets, modifiers, &fb_info->fb_id, flags); } if (rc < 0) { strides[0] = KMSDRM_gbm_bo_get_stride(bo); handles[0] = KMSDRM_gbm_bo_get_handle(bo).u32; rc = KMSDRM_drmModeAddFB(viddata->drm_fd, w, h, 24, 32, strides[0], handles[0], &fb_info->fb_id); } if (rc < 0) { SDL_free(fb_info); return NULL; } SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "New DRM FB (%u): %ux%u, from BO %p", fb_info->fb_id, w, h, (void *)bo); // Associate our DRM framebuffer with this buffer object KMSDRM_gbm_bo_set_user_data(bo, fb_info, KMSDRM_FBDestroyCallback); return fb_info; } static void KMSDRM_FlipHandler(int fd, unsigned int frame, unsigned int sec, unsigned int usec, void *data) { *((bool *)data) = false; } bool KMSDRM_WaitPageflip(SDL_VideoDevice *_this, SDL_WindowData *windata) { SDL_VideoData *viddata = _this->internal; drmEventContext ev = { 0 }; struct pollfd pfd = { 0 }; int ret; ev.version = DRM_EVENT_CONTEXT_VERSION; ev.page_flip_handler = KMSDRM_FlipHandler; pfd.fd = viddata->drm_fd; pfd.events = POLLIN; /* Stay on the while loop until we get the desired event. We need the while the loop because we could be in a situation where: -We get and event on the FD in time, thus not on exiting on return number 1. -The event is not an error, thus not exiting on return number 2. -The event is of POLLIN type, but even then, if the event is not a pageflip, drmHandleEvent() won't unset wait_for_pageflip, so we have to iterate and go polling again. If it wasn't for the while loop, we could erroneously exit the function without the pageflip event to arrive! For example, vblank events hit the FD and they are POLLIN events too (POLLIN means "there's data to read on the FD"), but they are not the pageflip event we are waiting for, so the drmEventHandle() doesn't run the flip handler, and since waiting_for_flip is set on the pageflip handle, it's not set and we stay on the loop, until we get the event for the pageflip, which is fine. */ while (windata->waiting_for_flip) { pfd.revents = 0; /* poll() waits for events arriving on the FD, and returns < 0 if timeout passes with no events or a signal occurred before any requested event (-EINTR). We wait forever (timeout = -1), but even if we DO get an event, we have yet to see if it's of the required type, then if it's a pageflip, etc */ ret = poll(&pfd, 1, -1); if (ret < 0) { if (errno == EINTR) { /* poll() returning < 0 and setting errno = EINTR means there was a signal before any requested event, so we immediately poll again. */ continue; } else { // There was another error. Don't pull again or we could get into a busy loop. SDL_LogError(SDL_LOG_CATEGORY_VIDEO, "DRM poll error"); return false; } } if (pfd.revents & (POLLHUP | POLLERR)) { // An event arrived on the FD in time, but it's an error. SDL_LogError(SDL_LOG_CATEGORY_VIDEO, "DRM poll hup or error"); return false; } if (pfd.revents & POLLIN) { /* There is data to read on the FD! Is the event a pageflip? We know it is a pageflip if it matches the event we are passing in &ev. If it does, drmHandleEvent() will unset windata->waiting_for_flip and we will get out of the "while" loop. If it's not, we keep iterating on the loop. */ KMSDRM_drmHandleEvent(viddata->drm_fd, &ev); } /* If we got to this point in the loop, we may iterate or exit the loop: -A legit (non-error) event arrived, and it was a POLLING event, and it was consumed by drmHandleEvent(). -If it was a PAGEFLIP event, waiting_for_flip will be unset by drmHandleEvent() and we will exit the loop. -If it wasn't a PAGEFLIP, drmHandleEvent() won't unset waiting_for_flip, so we iterare back to polling. -A legit (non-error) event arrived, but it's not a POLLIN event, so it hasn't to be consumed by drmHandleEvent(), so waiting_for_flip isn't set and we iterate back to polling. */ } return true; } /* Given w, h and refresh rate, returns the closest DRM video mode available on the DRM connector of the display. We use the SDL mode list (which we filled in KMSDRM_GetDisplayModes) because it's ordered, while the list on the connector is mostly random.*/ static drmModeModeInfo *KMSDRM_GetClosestDisplayMode(SDL_VideoDisplay *display, int width, int height) { SDL_DisplayData *dispdata = display->internal; drmModeConnector *conn = dispdata->connector.connector; SDL_DisplayMode closest; drmModeModeInfo *drm_mode; if (SDL_GetClosestFullscreenDisplayMode(display->id, width, height, 0.0f, false, &closest)) { const SDL_DisplayModeData *modedata = closest.internal; drm_mode = &conn->modes[modedata->mode_index]; return drm_mode; } else { return NULL; } } /*****************************************************************************/ // SDL Video and Display initialization/handling functions /* _this is a SDL_VideoDevice * */ /*****************************************************************************/ static bool KMSDRM_DropMaster(SDL_VideoDevice *_this) { SDL_VideoData *viddata = _this->internal; if (viddata->is_atomic) { // turn off atomic support until we are in control again. KMSDRM_drmSetClientCap(viddata->drm_fd, DRM_CLIENT_CAP_ATOMIC, 0); KMSDRM_drmSetClientCap(viddata->drm_fd, DRM_CLIENT_CAP_UNIVERSAL_PLANES, 0); } /* Check if we have DRM master to begin with */ if (KMSDRM_drmAuthMagic(viddata->drm_fd, 0) == -EACCES) { /* Nope, nothing to do then */ return true; } return KMSDRM_drmDropMaster(viddata->drm_fd) == 0; } // Deinitializes the internal of the SDL Displays in the SDL display list. static void KMSDRM_DeinitDisplays(SDL_VideoDevice *_this) { SDL_VideoData *viddata = _this->internal; SDL_DisplayID *displays; SDL_DisplayData *dispdata; int i; displays = SDL_GetDisplays(NULL); if (displays) { // Iterate on the SDL Display list. for (i = 0; displays[i]; ++i) { // Get the internal for this display dispdata = SDL_GetDisplayDriverData(displays[i]); // Free connector if (dispdata && dispdata->connector.connector) { KMSDRM_drmModeFreeConnector(dispdata->connector.connector); dispdata->connector.connector = NULL; } // Free CRTC if (dispdata && dispdata->crtc.crtc) { KMSDRM_drmModeFreeCrtc(dispdata->crtc.crtc); dispdata->crtc.crtc = NULL; } } SDL_free(displays); } if (viddata->drm_fd >= 0) { close(viddata->drm_fd); viddata->drm_fd = -1; } } static bool KMSDRM_ConnectorCheckVrrCapable(uint32_t drm_fd, uint32_t output_id) { bool found = false; uint64_t prop_value = 0; drmModeObjectPropertiesPtr props = KMSDRM_drmModeObjectGetProperties(drm_fd, output_id, DRM_MODE_OBJECT_CONNECTOR); if (props) { for (uint32_t i = 0; !found && i < props->count_props; ++i) { drmModePropertyPtr prop = KMSDRM_drmModeGetProperty(drm_fd, props->props[i]); if (prop) { if (SDL_strcasecmp(prop->name, "VRR_CAPABLE") == 0) { prop_value = props->prop_values[i]; found = true; } KMSDRM_drmModeFreeProperty(prop); } } KMSDRM_drmModeFreeObjectProperties(props); } if (found) { return prop_value ? true : false; } return false; } static bool KMSDRM_VrrPropId(uint32_t drm_fd, uint32_t crtc_id, uint32_t *vrr_prop_id) { bool found = false; drmModeObjectPropertiesPtr props = KMSDRM_drmModeObjectGetProperties(drm_fd, crtc_id, DRM_MODE_OBJECT_CRTC); if (props) { for (uint32_t i = 0; !found && i < props->count_props; ++i) { drmModePropertyPtr prop = KMSDRM_drmModeGetProperty(drm_fd, props->props[i]); if (prop) { if (SDL_strcmp(prop->name, "VRR_ENABLED") == 0) { *vrr_prop_id = prop->prop_id; found = true; } KMSDRM_drmModeFreeProperty(prop); } } KMSDRM_drmModeFreeObjectProperties(props); } return found; } static void KMSDRM_CrtcSetVrr(uint32_t drm_fd, uint32_t crtc_id, bool enabled) { uint32_t vrr_prop_id; if (!KMSDRM_VrrPropId(drm_fd, crtc_id, &vrr_prop_id)) { return; } KMSDRM_drmModeObjectSetProperty(drm_fd, crtc_id, DRM_MODE_OBJECT_CRTC, vrr_prop_id, enabled); } static bool KMSDRM_CrtcGetVrr(uint32_t drm_fd, uint32_t crtc_id) { uint32_t vrr_prop_id = 0; bool found = false; uint64_t prop_value = 0; if (!KMSDRM_VrrPropId(drm_fd, crtc_id, &vrr_prop_id)) { return false; } drmModeObjectPropertiesPtr props = KMSDRM_drmModeObjectGetProperties(drm_fd, crtc_id, DRM_MODE_OBJECT_CRTC); if (props) { for (uint32_t i = 0; !found && i < props->count_props; ++i) { drmModePropertyPtr prop = KMSDRM_drmModeGetProperty(drm_fd, props->props[i]); if (prop) { if (prop->prop_id == vrr_prop_id) { prop_value = props->prop_values[i]; found = true; } KMSDRM_drmModeFreeProperty(prop); } } KMSDRM_drmModeFreeObjectProperties(props); } if (found) { return prop_value ? true : false; } return false; } static int KMSDRM_CrtcGetOrientation(uint32_t drm_fd, uint32_t crtc_id) { bool found = false; int orientation = 0; drmModeObjectPropertiesPtr props = KMSDRM_drmModeObjectGetProperties(drm_fd, crtc_id, DRM_MODE_OBJECT_CONNECTOR); if (props) { for (uint32_t i = 0; !found && i < props->count_props; ++i) { drmModePropertyPtr prop = KMSDRM_drmModeGetProperty(drm_fd, props->props[i]); if (prop) { if (SDL_strcasecmp(prop->name, "panel orientation") == 0 && (prop->flags & DRM_MODE_PROP_ENUM)) { if (prop->count_enums) { // "Normal" is the default of no rotation (0 degrees) if (SDL_strcmp(prop->enums[0].name, "Left Side Up") == 0) { orientation = 90; } else if (SDL_strcmp(prop->enums[0].name, "Upside Down") == 0) { orientation = 180; } else if (SDL_strcmp(prop->enums[0].name, "Right Side Up") == 0) { orientation = 270; } } found = true; } KMSDRM_drmModeFreeProperty(prop); } } KMSDRM_drmModeFreeObjectProperties(props); } return orientation; } /* Gets a DRM connector, builds an SDL_Display with it, and adds it to the list of SDL Displays in _this->displays[] */ static void KMSDRM_AddDisplay(SDL_VideoDevice *_this, drmModeConnector *conn, drmModeRes *resources) { SDL_VideoData *viddata = _this->internal; SDL_DisplayData *dispdata = NULL; SDL_VideoDisplay display = { 0 }; SDL_DisplayModeData *modedata = NULL; drmModeEncoder *encoder = NULL; drmModeCrtc *crtc = NULL; const char *connector_type = NULL; SDL_DisplayID display_id; SDL_PropertiesID display_properties; char name_fmt[64]; int orientation; int mode_index; int i, j; int ret = 0; // Reserve memory for the new display's internal. dispdata = (SDL_DisplayData *)SDL_calloc(1, sizeof(SDL_DisplayData)); if (!dispdata) { ret = -1; goto cleanup; } /* Initialize some of the members of the new display's internal to sane values. */ dispdata->cursor_bo = NULL; dispdata->cursor_bo_drm_fd = -1; dispdata->kms_in_fence_fd = -1; dispdata->kms_out_fence_fd = -1; /* Since we create and show the default cursor on KMSDRM_InitMouse(), and we call KMSDRM_InitMouse() when we create a window, we have to know if the display used by the window already has a default cursor or not. If we don't, new default cursors would stack up on mouse->cursors and SDL would have to hide and delete them at quit, not to mention the memory leak... */ dispdata->default_cursor_init = false; // Try to find the connector's current encoder for (i = 0; i < resources->count_encoders; i++) { encoder = KMSDRM_drmModeGetEncoder(viddata->drm_fd, resources->encoders[i]); if (!encoder) { continue; } if (encoder->encoder_id == conn->encoder_id) { break; } KMSDRM_drmModeFreeEncoder(encoder); encoder = NULL; } if (!encoder) { // No encoder was connected, find the first supported one for (i = 0; i < resources->count_encoders; i++) { encoder = KMSDRM_drmModeGetEncoder(viddata->drm_fd, resources->encoders[i]); if (!encoder) { continue; } for (j = 0; j < conn->count_encoders; j++) { if (conn->encoders[j] == encoder->encoder_id) { break; } } if (j != conn->count_encoders) { break; } KMSDRM_drmModeFreeEncoder(encoder); encoder = NULL; } } if (!encoder) { ret = SDL_SetError("No connected encoder found for connector."); goto cleanup; } // Try to find a CRTC connected to this encoder crtc = KMSDRM_drmModeGetCrtc(viddata->drm_fd, encoder->crtc_id); /* If no CRTC was connected to the encoder, find the first CRTC that is supported by the encoder, and use that. */ if (!crtc) { for (i = 0; i < resources->count_crtcs; i++) { if (encoder->possible_crtcs & (1 << i)) { encoder->crtc_id = resources->crtcs[i]; crtc = KMSDRM_drmModeGetCrtc(viddata->drm_fd, encoder->crtc_id); break; } } } if (!crtc) { ret = SDL_SetError("No CRTC found for connector."); goto cleanup; } // Find the index of the mode attached to this CRTC mode_index = -1; for (i = 0; i < conn->count_modes; i++) { drmModeModeInfo *mode = &conn->modes[i]; if (!SDL_memcmp(mode, &crtc->mode, sizeof(crtc->mode))) { mode_index = i; break; } } if (mode_index == -1) { int current_area, largest_area = 0; // Find the preferred mode or the highest resolution mode for (i = 0; i < conn->count_modes; i++) { drmModeModeInfo *mode = &conn->modes[i]; if (mode->type & DRM_MODE_TYPE_PREFERRED) { mode_index = i; break; } current_area = mode->hdisplay * mode->vdisplay; if (current_area > largest_area) { mode_index = i; largest_area = current_area; } } if (mode_index != -1) { crtc->mode = conn->modes[mode_index]; } } if (mode_index == -1) { ret = SDL_SetError("Failed to find index of mode attached to the CRTC."); goto cleanup; } /*********************************************/ // Create an SDL Display for this connector. /*********************************************/ /*********************************************/ // Part 1: setup the SDL_Display internal. /*********************************************/ /* Get the mode currently setup for this display, which is the mode currently setup on the CRTC we found for the active connector. */ dispdata->mode = crtc->mode; dispdata->original_mode = crtc->mode; dispdata->fullscreen_mode = crtc->mode; if (dispdata->mode.hdisplay == 0 || dispdata->mode.vdisplay == 0) { ret = SDL_SetError("Couldn't get a valid connector videomode."); goto cleanup; } // Store the connector and crtc for this display. dispdata->connector.connector = conn; dispdata->crtc.crtc = crtc; // save previous vrr state dispdata->saved_vrr = KMSDRM_CrtcGetVrr(viddata->drm_fd, crtc->crtc_id); // try to enable vrr if (KMSDRM_ConnectorCheckVrrCapable(viddata->drm_fd, conn->connector_id)) { SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Enabling VRR"); KMSDRM_CrtcSetVrr(viddata->drm_fd, crtc->crtc_id, true); } // Set the name by the connector type, if possible if (KMSDRM_drmModeGetConnectorTypeName) { connector_type = KMSDRM_drmModeGetConnectorTypeName(conn->connector_type); if (connector_type == NULL) { connector_type = "Unknown"; } SDL_snprintf(name_fmt, sizeof(name_fmt), "%s-%u", connector_type, conn->connector_type_id); } dispdata->crtc.props = KMSDRM_drmModeObjectGetProperties(viddata->drm_fd, crtc->crtc_id, DRM_MODE_OBJECT_CRTC); dispdata->crtc.props_info = SDL_calloc(dispdata->crtc.props->count_props, sizeof(*dispdata->crtc.props_info)); if (!dispdata->crtc.props_info) { ret = false; goto cleanup; } for (i = 0; i < dispdata->crtc.props->count_props; i++) { dispdata->crtc.props_info[i] = KMSDRM_drmModeGetProperty(viddata->drm_fd, dispdata->crtc.props->props[i]); } /* Get connector properties */ dispdata->connector.props = KMSDRM_drmModeObjectGetProperties(viddata->drm_fd, conn->connector_id, DRM_MODE_OBJECT_CONNECTOR); dispdata->connector.props_info = SDL_calloc(dispdata->connector.props->count_props, sizeof(*dispdata->connector.props_info)); if (!dispdata->connector.props_info) { ret = false; goto cleanup; } for (i = 0; i < dispdata->connector.props->count_props; i++) { dispdata->connector.props_info[i] = KMSDRM_drmModeGetProperty(viddata->drm_fd, dispdata->connector.props->props[i]); } /*****************************************/ // Part 2: setup the SDL_Display itself. /*****************************************/ /* Setup the display. There's no problem with it being still incomplete. */ modedata = SDL_calloc(1, sizeof(SDL_DisplayModeData)); if (!modedata) { ret = -1; goto cleanup; } modedata->mode_index = mode_index; display.internal = dispdata; display.desktop_mode.w = dispdata->mode.hdisplay; display.desktop_mode.h = dispdata->mode.vdisplay; CalculateRefreshRate(&dispdata->mode, &display.desktop_mode.refresh_rate_numerator, &display.desktop_mode.refresh_rate_denominator); display.desktop_mode.format = SDL_PIXELFORMAT_ARGB8888; display.desktop_mode.internal = modedata; if (connector_type) { display.name = name_fmt; } // Add the display to the list of SDL displays. display_id = SDL_AddVideoDisplay(&display, false); if (!display_id) { ret = -1; goto cleanup; } orientation = KMSDRM_CrtcGetOrientation(viddata->drm_fd, crtc->crtc_id); display_properties = SDL_GetDisplayProperties(display_id); SDL_SetNumberProperty(display_properties, SDL_PROP_DISPLAY_KMSDRM_PANEL_ORIENTATION_NUMBER, orientation); #ifdef DEBUG_KMSDRM // Use this if you ever need to see info on all available planes. get_planes_info(_this, dispdata); #endif cleanup: if (encoder) { KMSDRM_drmModeFreeEncoder(encoder); } if (ret) { // Error (complete) cleanup if (dispdata) { if (dispdata->connector.connector) { KMSDRM_drmModeFreeConnector(dispdata->connector.connector); } if (dispdata->crtc.crtc) { KMSDRM_drmModeFreeCrtc(dispdata->crtc.crtc); } SDL_free(dispdata->connector.props_info); SDL_free(dispdata->crtc.props_info); SDL_free(dispdata->display_plane); SDL_free(dispdata); } } } // NOLINT(clang-analyzer-unix.Malloc): If no error `dispdata` is saved in the display static void KMSDRM_SortDisplays(SDL_VideoDevice *_this) { const char *name_hint = SDL_GetHint(SDL_HINT_VIDEO_DISPLAY_PRIORITY); if (name_hint) { char *saveptr; char *str = SDL_strdup(name_hint); SDL_VideoDisplay **sorted_list = SDL_malloc(sizeof(SDL_VideoDisplay *) * _this->num_displays); if (str && sorted_list) { int sorted_index = 0; // Sort the requested displays to the front of the list. const char *token = SDL_strtok_r(str, ",", &saveptr); while (token) { for (int i = 0; i < _this->num_displays; ++i) { SDL_VideoDisplay *d = _this->displays[i]; if (d && SDL_strcmp(token, d->name) == 0) { sorted_list[sorted_index++] = d; _this->displays[i] = NULL; break; } } token = SDL_strtok_r(NULL, ",", &saveptr); } // Append the remaining displays to the end of the list. for (int i = 0; i < _this->num_displays; ++i) { if (_this->displays[i]) { sorted_list[sorted_index++] = _this->displays[i]; } } // Copy the sorted list back to the display list. SDL_memcpy(_this->displays, sorted_list, sizeof(SDL_VideoDisplay *) * _this->num_displays); } SDL_free(str); SDL_free(sorted_list); } } static bool set_client_atomic_caps(int fd) { if (!SDL_GetHintBoolean(SDL_HINT_KMSDRM_ATOMIC, true)) { return false; // emergency escape hatch. } else if (KMSDRM_drmSetClientCap(fd, DRM_CLIENT_CAP_ATOMIC, 1)) { return false; // no atomic modesetting support. } else if (KMSDRM_drmSetClientCap(fd, DRM_CLIENT_CAP_UNIVERSAL_PLANES, 1)) { KMSDRM_drmSetClientCap(fd, DRM_CLIENT_CAP_ATOMIC, 0); // turn this back off again. return false; // no universal planes support. } return true; } /* Initializes the list of SDL displays: we build a new display for each connecter connector we find. This is to be called early, in VideoInit(), because it gets us the videomode information, which SDL needs immediately after VideoInit(). */ static bool KMSDRM_InitDisplays(SDL_VideoDevice *_this) { SDL_VideoData *viddata = _this->internal; drmModeRes *resources = NULL; uint64_t async_pageflip = 0; int i; bool result = true; // Open /dev/dri/cardNN (/dev/drmN if on OpenBSD version less than 6.9) (void)SDL_snprintf(viddata->devpath, sizeof(viddata->devpath), "%s%d", kmsdrm_dri_cardpath, viddata->devindex); SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Opening device %s", viddata->devpath); viddata->drm_fd = open(viddata->devpath, O_RDWR | O_CLOEXEC); if (viddata->drm_fd < 0) { result = SDL_SetError("Could not open %s", viddata->devpath); goto cleanup; } SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Opened DRM FD (%d)", viddata->drm_fd); // Set ATOMIC & UNIVERSAL PLANES compatibility viddata->is_atomic = set_client_atomic_caps(viddata->drm_fd); SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "DRM FD (%d) %s atomic", viddata->drm_fd, viddata->is_atomic ? "SUPPORTS" : "DOES NOT SUPPORT"); // Get all of the available connectors / devices / crtcs resources = KMSDRM_drmModeGetResources(viddata->drm_fd); if (!resources) { result = SDL_SetError("drmModeGetResources(%d) failed", viddata->drm_fd); goto cleanup; } /* Iterate on the available connectors. For every connected connector, we create an SDL_Display and add it to the list of SDL Displays. */ for (i = 0; i < resources->count_connectors; i++) { drmModeConnector *conn = KMSDRM_drmModeGetConnector(viddata->drm_fd, resources->connectors[i]); if (!conn) { continue; } if (conn->connection == DRM_MODE_CONNECTED && conn->count_modes) { /* If it's a connected connector with available videomodes, try to add an SDL Display representing it. KMSDRM_AddDisplay() is purposely void, so if it fails (no encoder for connector, no valid video mode for connector etc...) we can keep looking for connected connectors. */ KMSDRM_AddDisplay(_this, conn, resources); } else { // If it's not, free it now. KMSDRM_drmModeFreeConnector(conn); } } // Have we added any SDL displays? if (SDL_GetPrimaryDisplay() == 0) { result = SDL_SetError("No connected displays found."); goto cleanup; } // Sort the displays, if necessary KMSDRM_SortDisplays(_this); // Determine if video hardware supports async pageflips. if (KMSDRM_drmGetCap(viddata->drm_fd, DRM_CAP_ASYNC_PAGE_FLIP, &async_pageflip) != 0) { SDL_LogError(SDL_LOG_CATEGORY_VIDEO, "Could not determine async page flip capability."); } viddata->async_pageflip_support = async_pageflip ? true : false; /***********************************/ // Block for Vulkan compatibility. /***********************************/ /* Vulkan requires DRM master on its own FD to work, so try to drop master on our FD. This will only work without root on kernels v5.8 and later. If it doesn't work, just close the FD and we'll reopen it later. */ if (!KMSDRM_DropMaster(_this)) { close(viddata->drm_fd); viddata->drm_fd = -1; } cleanup: if (resources) { KMSDRM_drmModeFreeResources(resources); } if (!result) { if (viddata->drm_fd >= 0) { close(viddata->drm_fd); viddata->drm_fd = -1; } } return result; } /* Init the Vulkan-INCOMPATIBLE stuff: Reopen FD, create gbm dev, create dumb buffer and setup display plane. This is to be called late, in WindowCreate(), and ONLY if this is not a Vulkan window. We are doing this so late to allow Vulkan to work if we build a VK window. These things are incompatible with Vulkan, which accesses the same resources internally so they must be free when trying to build a Vulkan surface. */ static bool KMSDRM_GBMInit(SDL_VideoDevice *_this, SDL_DisplayData *dispdata) { SDL_VideoData *viddata = _this->internal; bool result = true; // Reopen the FD if we weren't able to drop master on the original one if (viddata->drm_fd < 0) { viddata->drm_fd = open(viddata->devpath, O_RDWR | O_CLOEXEC); if (viddata->drm_fd < 0) { return SDL_SetError("Could not reopen %s", viddata->devpath); } } viddata->is_atomic = set_client_atomic_caps(viddata->drm_fd); // Set the FD as current DRM master. KMSDRM_drmSetMaster(viddata->drm_fd); // Create the GBM device. viddata->gbm_dev = KMSDRM_gbm_create_device(viddata->drm_fd); if (!viddata->gbm_dev) { result = SDL_SetError("Couldn't create gbm device."); } else { // Setup the display plane. ONLY do this after dispdata has the right // crtc and connector, because these are used in this function. result = setup_plane(_this, dispdata, &dispdata->display_plane, DRM_PLANE_TYPE_PRIMARY); if (!result) { SDL_SetError("can't find suitable display plane."); } } viddata->gbm_init = true; return result; } // Deinit the Vulkan-incompatible KMSDRM stuff. static void KMSDRM_GBMDeinit(SDL_VideoDevice *_this, SDL_DisplayData *dispdata) { SDL_VideoData *viddata = _this->internal; // Free display plane free_plane(&dispdata->display_plane); // Free cursor plane (if still not freed) free_plane(&dispdata->cursor_plane); /* Destroy GBM device. GBM surface is destroyed by DestroySurfaces(), already called when we get here. */ if (viddata->gbm_dev) { KMSDRM_gbm_device_destroy(viddata->gbm_dev); viddata->gbm_dev = NULL; } /* Finally drop DRM master if possible, otherwise close DRM FD. May be reopened on next non-vulkan window creation. */ if (viddata->drm_fd >= 0 && !KMSDRM_DropMaster(_this)) { close(viddata->drm_fd); viddata->drm_fd = -1; } viddata->gbm_init = false; } static void KMSDRM_DestroySurfaces(SDL_VideoDevice *_this, SDL_Window *window) { SDL_VideoData *viddata = _this->internal; SDL_WindowData *windata = window->internal; SDL_DisplayData *dispdata = SDL_GetDisplayDriverDataForWindow(window); int ret; /**********************************************/ // Wait for last issued pageflip to complete. /**********************************************/ // KMSDRM_WaitPageflip(_this, windata); if (viddata->is_atomic) { /* TODO : Continue investigating why this doesn't work. We should do this instead of making the display plane point to the TTY console, which isn't there after creating and destroying a Vulkan window. */ #if 0 // (note that this code has bitrotted a little, in addition to TODO comment above.) /* Disconnect the connector from the CRTC (remember: several connectors can read a CRTC), deactivate the CRTC, and set the PRIMARY PLANE props CRTC_ID and FB_ID to 0. Then we can destroy the GBM buffers and surface. */ add_connector_property(dispdata->atomic_req, dispdata->connector , "CRTC_ID", 0); add_crtc_property(dispdata->atomic_req, dispdata->crtc , "MODE_ID", 0); add_crtc_property(dispdata->atomic_req, dispdata->crtc , "active", 0); /**********************************************/ /* Wait for last issued pageflip to complete. */ /**********************************************/ KMSDRM_WaitPageFlip(_this, windata, -1); plane_info.plane = dispdata->display_plane; plane_info.crtc_id = 0; plane_info.fb_id = 0; /************************************************************************/ /* Restore the original CRTC configuration: configure the crtc with the */ /* original video mode and make it point to the original TTY buffer. */ /************************************************************************/ drm_atomic_set_plane_props(dispdata, &plane_info); ret = KMSDRM_drmModeSetCrtc(viddata->drm_fd, dispdata->crtc->crtc_id, dispdata->crtc->buffer_id, 0, 0, &dispdata->connector->connector_id, 1, &dispdata->original_mode); /* Issue atomic commit that is blocking and allows modesetting. */ if (drm_atomic_commit(_this, dispdata, true, true)) { SDL_SetError("Failed to issue atomic commit on surfaces destruction."); /* If we failed to set the original mode, try to set the connector preferred mode. */ if (ret && (dispdata->crtc->mode_valid == 0)) { ret = KMSDRM_drmModeSetCrtc(viddata->drm_fd, dispdata->crtc->crtc_id, dispdata->crtc->buffer_id, 0, 0, &dispdata->connector->connector_id, 1, &dispdata->original_mode); } #endif #if 1 /************************************************************/ /* Make the display plane point to the original TTY buffer. */ /* We have to configure it's input and output scaling */ /* parameters accordingly. */ /************************************************************/ KMSDRM_PlaneInfo plane_info; SDL_zero(plane_info); plane_info.plane = dispdata->display_plane; plane_info.crtc_id = dispdata->crtc.crtc->crtc_id; plane_info.fb_id = dispdata->crtc.crtc->buffer_id; plane_info.src_w = dispdata->original_mode.hdisplay; plane_info.src_h = dispdata->original_mode.vdisplay; plane_info.crtc_w = dispdata->original_mode.hdisplay; plane_info.crtc_h = dispdata->original_mode.vdisplay; drm_atomic_set_plane_props(dispdata, &plane_info); if (drm_atomic_commit(_this, dispdata, true, false)) { SDL_SetError("Failed to issue atomic commit on surfaces destruction."); } } #endif /************************************************************************/ // Restore the original CRTC configuration: configure the crtc with the // original video mode and make it point to the original TTY buffer. /************************************************************************/ ret = KMSDRM_drmModeSetCrtc(viddata->drm_fd, dispdata->crtc.crtc->crtc_id, dispdata->crtc.crtc->buffer_id, 0, 0, &dispdata->connector.connector->connector_id, 1, &dispdata->original_mode); // If we failed to set the original mode, try to set the connector preferred mode. if (ret && (dispdata->crtc.crtc->mode_valid == 0)) { ret = KMSDRM_drmModeSetCrtc(viddata->drm_fd, dispdata->crtc.crtc->crtc_id, dispdata->crtc.crtc->buffer_id, 0, 0, &dispdata->connector.connector->connector_id, 1, &dispdata->original_mode); } if (ret) { SDL_LogError(SDL_LOG_CATEGORY_VIDEO, "Could not restore CRTC"); } /***************************/ // Destroy the GBM buffers /***************************/ if (windata->bo) { if (windata->bo != windata->next_bo) { KMSDRM_gbm_surface_release_buffer(windata->gs, windata->bo); } windata->bo = NULL; } if (windata->next_bo) { KMSDRM_gbm_surface_release_buffer(windata->gs, windata->next_bo); windata->next_bo = NULL; } /***************************/ // Destroy the EGL surface /***************************/ SDL_EGL_MakeCurrent(_this, EGL_NO_SURFACE, EGL_NO_CONTEXT); if (windata->egl_surface != EGL_NO_SURFACE) { SDL_EGL_DestroySurface(_this, windata->egl_surface); windata->egl_surface = EGL_NO_SURFACE; } /***************************/ // Destroy the GBM surface /***************************/ if (windata->gs) { KMSDRM_gbm_surface_destroy(windata->gs); windata->gs = NULL; } } static void KMSDRM_GetModeToSet(SDL_Window *window, drmModeModeInfo *out_mode) { SDL_VideoDisplay *display = SDL_GetVideoDisplayForWindow(window); SDL_DisplayData *dispdata = display->internal; if (window->fullscreen_exclusive) { *out_mode = dispdata->fullscreen_mode; } else { drmModeModeInfo *mode = KMSDRM_GetClosestDisplayMode(display, window->windowed.w, window->windowed.h); if (mode) { *out_mode = *mode; } else { *out_mode = dispdata->original_mode; } } } static void KMSDRM_DirtySurfaces(SDL_Window *window) { SDL_WindowData *windata = window->internal; drmModeModeInfo mode; /* Can't recreate EGL surfaces right now, need to wait until SwapWindow so the correct thread-local surface and context state are available */ windata->egl_surface_dirty = true; /* The app may be waiting for the resize event after calling SetWindowSize or SetWindowFullscreen, send a fake event for now since the actual recreation is deferred */ KMSDRM_GetModeToSet(window, &mode); SDL_SendWindowEvent(window, SDL_EVENT_WINDOW_RESIZED, mode.hdisplay, mode.vdisplay); } /* This determines the size of the fb, which comes from the GBM surface that we create here. */ bool KMSDRM_CreateSurfaces(SDL_VideoDevice *_this, SDL_Window *window) { SDL_VideoData *viddata = _this->internal; SDL_WindowData *windata = window->internal; SDL_VideoDisplay *display = SDL_GetVideoDisplayForWindow(window); SDL_DisplayData *dispdata = display->internal; uint32_t surface_fmt = GBM_FORMAT_ARGB8888; uint32_t surface_flags = GBM_BO_USE_SCANOUT | GBM_BO_USE_RENDERING; EGLContext egl_context; bool result = true; // If the current window already has surfaces, destroy them before creating other. if (windata->gs) { KMSDRM_DestroySurfaces(_this, window); } if (!KMSDRM_gbm_device_is_format_supported(viddata->gbm_dev, surface_fmt, surface_flags)) { SDL_LogWarn(SDL_LOG_CATEGORY_VIDEO, "GBM surface format not supported. Trying anyway."); } /* The KMSDRM backend doesn't always set the mode the higher-level code in SDL_video.c expects. Hulk-smash the display's current_mode to keep the mode that's set in sync with what SDL_video.c thinks is set FIXME: How do we do that now? Can we get a better idea at the higher level? */ KMSDRM_GetModeToSet(window, &dispdata->mode); windata->gs = KMSDRM_gbm_surface_create(viddata->gbm_dev, dispdata->mode.hdisplay, dispdata->mode.vdisplay, surface_fmt, surface_flags); if (!windata->gs && errno == ENOSYS) { // Try again without the scanout flags, needed on NVIDIA drivers windata->gs = KMSDRM_gbm_surface_create(viddata->gbm_dev, dispdata->mode.hdisplay, dispdata->mode.vdisplay, surface_fmt, 0); } if (!windata->gs) { return SDL_SetError("Could not create GBM surface: %s", strerror(errno)); } /* We can't get the EGL context yet because SDL_CreateRenderer has not been called, but we need an EGL surface NOW, or GL won't be able to render into any surface and we won't see the first frame. */ SDL_EGL_SetRequiredVisualId(_this, surface_fmt); windata->egl_surface = SDL_EGL_CreateSurface(_this, window, (NativeWindowType)windata->gs); if (windata->egl_surface == EGL_NO_SURFACE) { result = SDL_SetError("Could not create EGL window surface"); goto cleanup; } /* Current context passing to EGL is now done here. If something fails, go back to delayed SDL_EGL_MakeCurrent() call in SwapWindow. */ egl_context = (EGLContext)SDL_GL_GetCurrentContext(); result = SDL_EGL_MakeCurrent(_this, windata->egl_surface, egl_context); SDL_SendWindowEvent(window, SDL_EVENT_WINDOW_RESIZED, dispdata->mode.hdisplay, dispdata->mode.vdisplay); windata->egl_surface_dirty = false; cleanup: if (!result) { // Error (complete) cleanup. if (windata->gs) { KMSDRM_gbm_surface_destroy(windata->gs); windata->gs = NULL; } } return result; } #ifdef SDL_INPUT_LINUXEV static void KMSDRM_ReleaseVT(void *userdata) { SDL_VideoDevice *_this = (SDL_VideoDevice *)userdata; SDL_VideoData *viddata = _this->internal; int i; for (i = 0; i < viddata->num_windows; i++) { SDL_Window *window = viddata->windows[i]; if (!(window->flags & SDL_WINDOW_VULKAN)) { KMSDRM_DestroySurfaces(_this, window); } } KMSDRM_drmDropMaster(viddata->drm_fd); } static void KMSDRM_AcquireVT(void *userdata) { SDL_VideoDevice *_this = (SDL_VideoDevice *)userdata; SDL_VideoData *viddata = _this->internal; int i; KMSDRM_drmSetMaster(viddata->drm_fd); for (i = 0; i < viddata->num_windows; i++) { SDL_Window *window = viddata->windows[i]; if (!(window->flags & SDL_WINDOW_VULKAN)) { KMSDRM_CreateSurfaces(_this, window); } } } #endif // defined SDL_INPUT_LINUXEV bool KMSDRM_VideoInit(SDL_VideoDevice *_this) { bool result = true; SDL_VideoData *viddata = _this->internal; SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "KMSDRM_VideoInit()"); viddata->video_init = false; viddata->gbm_init = false; /* Get KMSDRM resources info and store what we need. Getting and storing this info isn't a problem for VK compatibility. For VK-incompatible initializations we have KMSDRM_GBMInit(), which is called on window creation, and only when we know it's not a VK window. */ if (!KMSDRM_InitDisplays(_this)) { result = SDL_SetError("error getting KMSDRM displays information"); } #ifdef SDL_INPUT_LINUXEV SDL_EVDEV_Init(); SDL_EVDEV_SetVTSwitchCallbacks(KMSDRM_ReleaseVT, _this, KMSDRM_AcquireVT, _this); #elif defined(SDL_INPUT_WSCONS) SDL_WSCONS_Init(); #endif viddata->video_init = true; return result; } /* The internal pointers, like dispdata, viddata, windata, etc... are freed by SDL internals, so not our job. */ void KMSDRM_VideoQuit(SDL_VideoDevice *_this) { SDL_VideoData *viddata = _this->internal; KMSDRM_DeinitDisplays(_this); #ifdef SDL_INPUT_LINUXEV SDL_EVDEV_SetVTSwitchCallbacks(NULL, NULL, NULL, NULL); SDL_EVDEV_Quit(); #elif defined(SDL_INPUT_WSCONS) SDL_WSCONS_Quit(); #endif // Clear out the window list SDL_free(viddata->windows); viddata->windows = NULL; viddata->max_windows = 0; viddata->num_windows = 0; viddata->video_init = false; } // Read modes from the connector modes, and store them in display->display_modes. bool KMSDRM_GetDisplayModes(SDL_VideoDevice *_this, SDL_VideoDisplay *display) { SDL_DisplayData *dispdata = display->internal; drmModeConnector *conn = dispdata->connector.connector; SDL_DisplayMode mode; int i; for (i = 0; i < conn->count_modes; i++) { SDL_DisplayModeData *modedata = SDL_calloc(1, sizeof(SDL_DisplayModeData)); if (modedata) { modedata->mode_index = i; } SDL_zero(mode); mode.w = conn->modes[i].hdisplay; mode.h = conn->modes[i].vdisplay; CalculateRefreshRate(&conn->modes[i], &mode.refresh_rate_numerator, &mode.refresh_rate_denominator); mode.format = SDL_PIXELFORMAT_ARGB8888; mode.internal = modedata; if (!SDL_AddFullscreenDisplayMode(display, &mode)) { SDL_free(modedata); } } return true; } bool KMSDRM_SetDisplayMode(SDL_VideoDevice *_this, SDL_VideoDisplay *display, SDL_DisplayMode *mode) { /* Set the dispdata->mode to the new mode and leave actual modesetting pending to be done on SwapWindow() via drmModeSetCrtc() */ SDL_VideoData *viddata = _this->internal; SDL_DisplayData *dispdata = display->internal; SDL_DisplayModeData *modedata = mode->internal; drmModeConnector *conn = dispdata->connector.connector; int i; // Don't do anything if we are in Vulkan mode. if (viddata->vulkan_mode) { return true; } if (!modedata) { return SDL_SetError("Mode doesn't have an associated index"); } /* Take note of the new mode to be set, and leave the CRTC modeset pending so it's done in SwapWindow. */ dispdata->fullscreen_mode = conn->modes[modedata->mode_index]; for (i = 0; i < viddata->num_windows; i++) { KMSDRM_DirtySurfaces(viddata->windows[i]); } return true; } void KMSDRM_DestroyWindow(SDL_VideoDevice *_this, SDL_Window *window) { SDL_WindowData *windata = window->internal; SDL_DisplayData *dispdata = SDL_GetDisplayDriverDataForWindow(window); SDL_VideoData *viddata; bool is_vulkan = window->flags & SDL_WINDOW_VULKAN; // Is this a VK window? unsigned int i, j; if (!windata) { return; } // restore vrr state KMSDRM_CrtcSetVrr(windata->viddata->drm_fd, dispdata->crtc.crtc->crtc_id, dispdata->saved_vrr); viddata = windata->viddata; if (!is_vulkan && viddata->gbm_init) { // Destroy cursor GBM BO of the display of this window. KMSDRM_DestroyCursorBO(_this, SDL_GetVideoDisplayForWindow(window)); // Destroy GBM surface and buffers. KMSDRM_DestroySurfaces(_this, window); /* Unload library and deinit GBM, but only if this is the last window. Note that this is the right comparison because num_windows could be 1 if there is a complete window, or 0 if we got here from SDL_CreateWindow() because KMSDRM_CreateWindow() returned an error so the window wasn't added to the windows list. */ if (viddata->num_windows <= 1) { // Unload EGL/GL library and free egl_data. if (_this->egl_data) { SDL_EGL_UnloadLibrary(_this); _this->gl_config.driver_loaded = 0; } // Free display plane, and destroy GBM device. KMSDRM_GBMDeinit(_this, dispdata); } } else { // If we were in Vulkan mode, get out of it. if (viddata->vulkan_mode) { viddata->vulkan_mode = false; } } /********************************************/ // Remove from the internal SDL window list /********************************************/ for (i = 0; i < viddata->num_windows; i++) { if (viddata->windows[i] == window) { viddata->num_windows--; for (j = i; j < viddata->num_windows; j++) { viddata->windows[j] = viddata->windows[j + 1]; } break; } } /*********************************************************************/ // Free the window internal. Bye bye, surface and buffer pointers! /*********************************************************************/ SDL_free(window->internal); window->internal = NULL; } /**********************************************************************/ // We simply IGNORE if it's a fullscreen window, window->flags don't // reflect it: if it's fullscreen, KMSDRM_SetWindowFullscreen() will // be called by SDL later, and we can manage it there. /**********************************************************************/ bool KMSDRM_CreateWindow(SDL_VideoDevice *_this, SDL_Window *window, SDL_PropertiesID create_props) { SDL_WindowData *windata = NULL; SDL_VideoData *viddata = _this->internal; SDL_VideoDisplay *display = SDL_GetVideoDisplayForWindow(window); SDL_DisplayData *dispdata = display->internal; bool is_vulkan = window->flags & SDL_WINDOW_VULKAN; // Is this a VK window? bool vulkan_mode = viddata->vulkan_mode; // Do we have any Vulkan windows? NativeDisplayType egl_display; drmModeModeInfo *mode; bool result = true; // Allocate window internal data windata = (SDL_WindowData *)SDL_calloc(1, sizeof(SDL_WindowData)); if (!windata) { return false; } // Setup driver data for this window windata->viddata = viddata; window->internal = windata; // Do we want a double buffering scheme to get low video lag? windata->double_buffer = false; if (SDL_GetHintBoolean(SDL_HINT_VIDEO_DOUBLE_BUFFER, false)) { windata->double_buffer = true; } if (!is_vulkan && !vulkan_mode) { // NON-Vulkan block. /* Maybe you didn't ask for an OPENGL window, but that's what you will get. See following comments on why. */ window->flags |= SDL_WINDOW_OPENGL; if (!(viddata->gbm_init)) { /* After SDL_CreateWindow, most SDL programs will do SDL_CreateRenderer(), which will in turn call GL_CreateRenderer() or GLES2_CreateRenderer(). In order for the GL_CreateRenderer() or GLES2_CreateRenderer() call to succeed without an unnecessary window re-creation, we must: -Mark the window as being OPENGL -Load the GL library (which can't be done until the GBM device has been created, so we have to do it here instead of doing it on VideoInit()) and mark it as loaded by setting gl_config.driver_loaded to 1. So if you ever see KMSDRM_CreateWindow() to be called two times in tests, don't be shy to debug GL_CreateRenderer() or GLES2_CreateRenderer() to find out why! */ /* Reopen FD, create gbm dev, setup display plane, etc,. but only when we come here for the first time, and only if it's not a VK window. */ if (!KMSDRM_GBMInit(_this, dispdata)) { return SDL_SetError("Can't init GBM on window creation."); } } /* Manually load the GL library. KMSDRM_EGL_LoadLibrary() has already been called by SDL_CreateWindow() but we don't do anything there, our KMSDRM_EGL_LoadLibrary() is a dummy precisely to be able to load it here. If we let SDL_CreateWindow() load the lib, it would be loaded before we call KMSDRM_GBMInit(), causing all GLES programs to fail. */ if (!_this->egl_data) { egl_display = (NativeDisplayType)_this->internal->gbm_dev; if (!SDL_EGL_LoadLibrary(_this, NULL, egl_display, EGL_PLATFORM_GBM_KHR)) { // Try again with OpenGL ES 2.0 _this->gl_config.profile_mask = SDL_GL_CONTEXT_PROFILE_ES; _this->gl_config.major_version = 2; _this->gl_config.minor_version = 0; if (!SDL_EGL_LoadLibrary(_this, NULL, egl_display, EGL_PLATFORM_GBM_KHR)) { return SDL_SetError("Can't load EGL/GL library on window creation."); } } _this->gl_config.driver_loaded = 1; } /* Create the cursor BO for the display of this window, now that we know this is not a VK window. */ KMSDRM_CreateCursorBO(display); /* Create and set the default cursor for the display of this window, now that we know this is not a VK window. */ KMSDRM_InitMouse(_this, display); /* The FULLSCREEN flags are cut out from window->flags at this point, so we can't know if a window is fullscreen or not, hence all windows are considered "windowed" at this point of their life. If a window is fullscreen, SDL internals will call KMSDRM_SetWindowFullscreen() to reconfigure it if necessary. */ mode = KMSDRM_GetClosestDisplayMode(display, window->windowed.w, window->windowed.h); if (mode) { dispdata->fullscreen_mode = *mode; } else { dispdata->fullscreen_mode = dispdata->original_mode; } /* Create the window surfaces with the size we have just chosen. Needs the window driverdata in place. */ if (!KMSDRM_CreateSurfaces(_this, window)) { return false; } } // NON-Vulkan block ends. /* Add window to the internal list of tracked windows. Note, while it may seem odd to support multiple fullscreen windows, some apps create an extra window as a dummy surface when working with multiple contexts */ if (viddata->num_windows >= viddata->max_windows) { unsigned int new_max_windows = viddata->max_windows + 1; SDL_Window **new_windows = (SDL_Window **)SDL_realloc(viddata->windows, new_max_windows * sizeof(SDL_Window *)); if (!new_windows) { return false; } viddata->windows = new_windows; viddata->max_windows = new_max_windows; } viddata->windows[viddata->num_windows++] = window; // If we have just created a Vulkan window, establish that we are in Vulkan mode now. viddata->vulkan_mode = is_vulkan; SDL_PropertiesID props = SDL_GetWindowProperties(window); SDL_SetNumberProperty(props, SDL_PROP_WINDOW_KMSDRM_DEVICE_INDEX_NUMBER, viddata->devindex); SDL_SetNumberProperty(props, SDL_PROP_WINDOW_KMSDRM_DRM_FD_NUMBER, viddata->drm_fd); SDL_SetPointerProperty(props, SDL_PROP_WINDOW_KMSDRM_GBM_DEVICE_POINTER, viddata->gbm_dev); if ((window->flags & SDL_WINDOW_NOT_FOCUSABLE) == 0) { /* Focus on the newly created window. SDL_SetMouseFocus() also takes care of calling KMSDRM_ShowCursor() if necessary. */ SDL_SetMouseFocus(window); SDL_SetKeyboardFocus(window); } // Tell the app that the window has moved to top-left. SDL_Rect display_bounds; SDL_GetDisplayBounds(SDL_GetDisplayForWindow(window), &display_bounds); SDL_SendWindowEvent(window, SDL_EVENT_WINDOW_MOVED, display_bounds.x, display_bounds.y); /* Allocated windata will be freed in KMSDRM_DestroyWindow, and KMSDRM_DestroyWindow() will be called by SDL_CreateWindow() if we return error on any of the previous returns of the function. */ return result; } void KMSDRM_SetWindowTitle(SDL_VideoDevice *_this, SDL_Window *window) { } bool KMSDRM_SetWindowPosition(SDL_VideoDevice *_this, SDL_Window *window) { return SDL_Unsupported(); } void KMSDRM_SetWindowSize(SDL_VideoDevice *_this, SDL_Window *window) { SDL_VideoData *viddata = _this->internal; if (!viddata->vulkan_mode) { KMSDRM_DirtySurfaces(window); } } SDL_FullscreenResult KMSDRM_SetWindowFullscreen(SDL_VideoDevice *_this, SDL_Window *window, SDL_VideoDisplay *display, SDL_FullscreenOp fullscreen) { SDL_VideoData *viddata = _this->internal; if (!viddata->vulkan_mode) { KMSDRM_DirtySurfaces(window); } return SDL_FULLSCREEN_SUCCEEDED; } void KMSDRM_ShowWindow(SDL_VideoDevice *_this, SDL_Window *window) { } void KMSDRM_HideWindow(SDL_VideoDevice *_this, SDL_Window *window) { } void KMSDRM_RaiseWindow(SDL_VideoDevice *_this, SDL_Window *window) { } void KMSDRM_MaximizeWindow(SDL_VideoDevice *_this, SDL_Window *window) { } void KMSDRM_MinimizeWindow(SDL_VideoDevice *_this, SDL_Window *window) { } void KMSDRM_RestoreWindow(SDL_VideoDevice *_this, SDL_Window *window) { } bool KMSDRM_SetWindowFocusable(SDL_VideoDevice *_this, SDL_Window *window, bool focusable) { return true; // this just has to exist or SDL_SetWindowFocusable() will refuse to change the window flag. } #endif // SDL_VIDEO_DRIVER_KMSDRM